Categories
  • Cerium%20Oxide%20Auto%20Glass%20Scratch%20Remover%20White%2050%20Gr
  • Cerium%20Oxide%20Auto%20Glass%20Scratch%20Remover%20White%2050%20Gr
Cerium Oxide Auto Glass Scratch Remover White 50 Gr
Product code : SOCOK50ESKI         Comments (0)        Add Comment
Marka :  Parox
467.63 TL   Taxes Included
New Product
1-3

Cerium Oxide Auto Glass Scratch Remover White 50 Gr

PAROX GLASS SCRATCH REMOVAL POWDER

When polishing powder is applied to glass, it reacts with the surface to form a complex cerium oxygen silicon compound that is softer than glass.

This softer surface layer can then be applied more easily to produce the final polished surface.

Since polishing is the final step of the surfacing process, errors in previous steps should not be expected to be corrected when the shape is formatted and flattened.

Therefore, the previous steps, beveling and flattening, must be done accurately and precisely.

How to apply Parox Cerium Oxide to auto glass?

The application of cerium to glass is very similar to the polishing applications we do on paint. The main difference between the two is the difference in hardness of the materials. The painted surface is very soft compared to glass. Since glass is a very hard material, higher cycle/pressure/time is required compared to paint. Inspection and condition assessment of the glass to get results. Before applying Parox Cerium, wash the glass you will apply very well, apply clay, determine how much paint, resin, dirt, etc. on the glass. If there is, clean it. In this way, you will be able to see the condition of your glass more clearly.

Materials and tools to be used

*You should do the application with a polishing machine, do not try to do it by hand, you will not get results because glass is a very hard material.

*In practice, you should use a fiber pad used for glass polishing. (It can be made of different materials, it is also known as wool felt etc., the important thing is that it is suitable for glass)

*Choose your pad and pad small, it can be between 75-125.

Preparing Parox Cerium Oxide

Parox Cerium is a powdered material, you need to dilute it to make it usable on your glass. For this, put about 50 gr in a small bottle. Pour as much powdered cerium and add water little by little and mix/shake.

Make sure that the lumps remaining at the bottom are mixed well, use a stick like a spoon if necessary. Its consistency should be neither too dry nor too liquid.

In practice, the air temperature should be low. Temperature between 15-20 C is suitable. Since cerium dries quickly in hot weather, application becomes difficult.

Slightly moisten your pad with some water before applying. Pour some generous amount of cerium onto the pad during the first application. Then you can continue with smaller amounts.


★
★
★
★
★
Total 0 Comment made


Thank you for your comment. Your comment will be published after it is done.
Comment on you
Verification Code
Cargo Company
DHL
Cargo Exit Zone
İstanbul
Delivery Details
DHL KARGO
Refund Cancellation Details
DHL KARGO
Similar products
New Product
Add To Cart
Cerium Oxide Auto Glass Scratch Remover White 100 Gr Cerium Oxide Auto Glass Scratch Remover White 100 Gr
Add To Cart
Auto Glass Scratch Remover 100 Gr Auto Glass Scratch Remover 100 Gr
Add To Cart
Auto Glass Scratch Remover 50 Gr Auto Glass Scratch Remover 50 Gr
Do you want to be informed first about discounted products and opportunities?
softtr® | Profesyonel E-Ticaret Sistemleri ile hazırlanmıştır.