

Cerium Oxide Auto Glass Scratch Remover White 100 Gr
PAROX GLASS SCRATCH REMOVAL POWDER
When polishing powder is applied to glass, it reacts with the surface to form a complex cerium oxygen silicon compound that is softer than glass.
This softer surface layer can then be applied more easily to produce the final polished surface.
Since polishing is the final step of the surfacing process, errors in previous steps should not be expected to be corrected when the shape is formatted and flattened.
Therefore, the previous steps, beveling and flattening, must be done accurately and precisely.
How to apply Parox Cerium Oxide to auto glass?
The application of cerium to glass is very similar to the polishing applications we do on paint. The main difference between the two is the difference in hardness of the materials. The painted surface is very soft compared to glass. Since glass is a very hard material, higher cycle/pressure/time is required compared to paint. Inspection and condition assessment of the glass to get results. Before applying Parox Cerium, wash the glass you will apply very well, apply clay, determine how much paint, resin, dirt, etc. on the glass. If there is, clean it. In this way, you will be able to see the condition of your glass more clearly.
Materials and tools to be used
*You should do the application with a polishing machine, do not try to do it by hand, you will not get results because glass is a very hard material.
*In practice, you should use a fiber pad used for glass polishing. (It can be made of different materials, it is also known as wool felt etc., the important thing is that it is suitable for glass)
*Choose your pad and pad small, it can be between 75-125.
Preparing Parox Cerium Oxide
Parox Cerium is a powdered material, you need to dilute it to make it usable on your glass. For this, put about 50 gr in a small bottle. Pour as much powdered cerium and add water little by little and mix/shake.
Make sure that the lumps remaining at the bottom are mixed well, use a stick like a spoon if necessary. Its consistency should be neither too dry nor too liquid.
In practice, the air temperature should be low. Temperature between 15-20 C is suitable. Since cerium dries quickly in hot weather, application becomes difficult.
Slightly moisten your pad with some water before applying. Pour some generous amount of cerium onto the pad during the first application. Then you can continue with smaller amounts.